Loading ...
Loading ...
Loading ...
35
AXIS P3301/-V/AXIS P3304/-V - System Options
Always - The camera will constantly attempt to connect to the AVHS service over the Internet. Once registered the camera
will stay connected to the service. This option can be used when the camera is already installed and it is not convenient to use
the one-click installation.
AXIS Internet Dynamic DNS Service
Enable this option to use the AXIS Internet Dynamic DNS service to assign a host name for easy access to your network
camera (requires Internet access).
Click Settings... to register the camera with the Axis Internet Dynamic DNS service, or to modify the existing settings (requires
access to the Internet). The domain name currently registered at the Axis Internet Dynamic DNS service for your product can
at any time be removed.
For more information, refer to the online help and go to www.axiscam.net
Advanced TCP/IP Settings
DNS Configuration - DNS (Domain Name Service) provides the translation of host names to IP addresses on your network.
Obtain DNS server address via DHCP - Automatically use the DNS server settings provided by the DHCP server. Click the View
button to see the current settings.
Use the following DNS server address - enter the desired DNS server by specifying the following:
• Domain name - Enter the domain(s) to search for the host name used by the network camera. Multiple domains can
be separated by semicolons (;). The host name is always the first part of a Fully Qualified Domain Name, for example,
myserver is the host name in the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is
the Domain name.
• DNS servers - Enter the IP addresses of the primary, and secondary DNS servers.
Note:
A secondary DNS server is not necessary.
NTP Configuration
Obtain NTP server address via DHCP - Select this radio button to automatically look up and use the NTP server settings as
provided by DHCP. Click the View button to see the current settings.
Use the following NTP server address - to create manual settings, check this radio button and enter the host name or IP
address of the NTP server.
Host Name Configuration - The network camera can be accessed using a host name, instead of an IP address. The host name
is usually the same as the assigned DNS Name.
For more information, see Users, on page 31.
Link-Local IPv4 Address - This is enabled by default and assigns the network camera an additional IP address for use with
UPnP
™. The camera can have both a Link-Local IP and a static/DHCP-supplied IP address at the same time - these will not
affect each other.
HTTP and HTTPS - The default HTTP/HTTPS port numbers (80 and 443 respectively) can be changed to any port within the
range 1024-65535. This is useful for simple security port mapping.
NAT traversal (port mapping) for IPv4 - A broadband router allows devices on a private network (LAN) to share a single
connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the
Internet. Security on the private network (LAN) is increased since most broadband routers are pre-configured to stop attempts
to access the private network (LAN) from the public network/Internet.
Loading ...
Loading ...
Loading ...