Loading ...
Loading ...
Loading ...
38 en | Troubleshooting FLEXIDOME IP starlight 8000i
2021-02 | V02 | F.01U.385.211
Installation manual
Bosch Security Systems B.V.
The maximum number of
connections has been reached.
Wait until there is a free
connection and call the
transmitter again.
Moisture/condensation
inside the bubble,
camera leaking.
Housing is not closed properly. Re-install camera and check for
proper closure.
Closing seals are damaged. Please contact your supplier or
system integrator, or go directly
to Bosch Security Systems
customer service.
Rubber grommet not placed
correctly.
Re-install rubber grommet.
Cable diameter or shape is not
as specified.
Re-install camera with proper
cabling.
Air vents are blocked due to
dirt/water.
Gently clean air vents.
Air vents are damaged or loose. Please contact your supplier or
system integrator, or go directly
to Bosch Security Systems
customer service.
Camera has been off for an
extensive period of time.
Turn camera on and leave it on
until condensation clears.
No audio transmission to
remote station.
Hardware fault. Check that all connected audio
units are operating correctly.
Faulty cable connections. Check all cables, plugs,
contacts and connections.
Incorrect configuration. Check audio parameters on the
Audio configuration and LIVE
page functions pages.
The audio voice connection is
already in use by another
receiver.
Wait until the connection is free
and then call the sender again.
The unit does not report
an alarm.
Alarm source is not selected. Select possible alarm sources
on the Alarm sources
configuration page.
No alarm response specified. Specify the desired alarm
response on the Alarm
connections configuration page;
if necessary change the IP
address.
Loading ...
Loading ...
Loading ...