Loading ...
Loading ...
Loading ...
22 en | Hardware installation FLEXIDOME IP starlight 8000i
2021-02 | V02 | F.01U.385.211
Installation manual
Bosch Security Systems B.V.
6. Put the cable through the hole of the conduit plate.
7. Attach the conduit plate with the conduit plate adapter to the surface with the washer
and a 5-6mm (0.2in.) screw. Tighten the screw between 2.5 and 4Nm (1.8lbfft and
3lbfft).
8. Remove the mounting plate from the box.
9. Mark the positions of the holes on the surface. The mounting plate has only one side
available for the conduit. Make sure to position it accordingly.
10. Drill the 4 holes with the appropriate diameter drill to support your 5-6mm (0.2in.)
screws and plugs.
11. Install 4 plugs in the holes.
12. Attach the mounting plate to the surface with 4 screws. Tighten the screws between 4
and 7Nm (3 and 5.2lbfft).
Loading ...
Loading ...
Loading ...