Loading ...
Loading ...
Loading ...
FLEXIDOME IP starlight 8000i Hardware installation | en 19
Bosch Security Systems B.V.
Installation manual
2021-02 | V02 | F.01U.385.211
6.1 Installing the mounting plate
The mounting plate is used to fix the camera to a flat surface. It offers different holes and
slots for a variety of fixing options.
5
3
1 10.2cm / 4in. Square junction box 2 Pole mount (NDA-U-PMAL/NDA-U-
PMAS)/Corner mount (NDA-U-CMA)
3 Single gang box or universal slot,
45mm / 1.8in to 85mm/3.3in
4 Double gang box
5 Ceiling/wall mount and pendant
interface plate (NDA-8000-PIP(W))
Note: Only options 1, 2, and 5 maintain
IK10+ rating
Installation options
The camera has two configurations for surface mounting:
– Refer to
Installing the mounting plate without conduit, page 20
, if the wires are not on
the outside of the surface.
– Refer to
Installing the mounting plate with conduit, page 21
, if the wires are on the
outside of the surface.
Additionally, the camera can cover various mounting options when combined with the
available accessories. See the
Mounting accessories, page 31
chapter for the available
accessories.
i
Notice!
The plugs and screws for surface mounting are not supplied with the camera.
Loading ...
Loading ...
Loading ...