Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
11
EMERGENCY S TOP
Before beginning a workout session ensure that the Safety Tether Key is properly
placed onto the Computer Console and the Safety Clip is securely attached to an
article of your clothing. If you fall the clip will pull out the SAFETY TETHER KEY
from the Computer Console and the running belt will stop immediately for
emergency stop, helping to prevent injury. Replaced the Safety Tether Key onto
the Computer Console. Press the START button to begin exercise again.
BELT ADJUSTMENT
The running belt is pre-adjusted to the running deck at the factory, but after
prolonged use it can stretch and require readjustment. To adjust the belt, turn
on the main power switch of the treadmill and let the belt run at a speed of
3.0-6.0MPH. Use the Allen Wrench provided to turn the rear roller adjustment
bolts in order to centre the belt. If the running belt is shifting to the left, turn the
left adjustment bolt 1/4 turn clockwise, and the running belt should start to
correct itself.
If the running belt is shifting to the right, then turn the right adjustment bolt 1/4
turn clockwise, and the belt should start to correct itself.
Keep turning the adjustment bolts until the running belt is properly centered.
SAFETY
TETHER
KEY
Tool: Allen Wrench
Loading ...
Loading ...
Loading ...