Loading ...
Loading ...
Loading ...
Troubleshooting
User interface
LED screen Possible faults Possible solution
The warning in-
dicator flashes.
Chain brake is
engaged.
Disengage the chain brake.
Temperature
deviation.
Let the product to cool down.
Overload. The
saw chain can
not move.
Release the saw chain.
The power trig-
ger and the
start/stop but-
ton are pushed
at the same
time.
Release the power trigger to activate the product.
Orange acti-
vate LED flash-
ing.
Low battery
voltage.
Charge the battery.
The warning in-
dicator is on.
Service. Speak to your servicing dealer.
Battery
LED display
Possible faults Possible solution
Green LED flashes. Low battery voltage. Charge the battery.
Error LED flashes. Temperature deviation. Use the battery in temperatures
between -10°C (14°F) and 40°C
(104°F).
Too much voltage. Make sure that the mains voltage
aligns with the voltage of the product.
Refer to the rating plate on the prod-
uct.
Remove the battery from the battery
charger.
Error LED comes on. Too much cell difference (1V). Speak to your servicing dealer.
1860 - 007 - 09.01.2024 39
Loading ...
Loading ...
Loading ...