Loading ...
Loading ...
Loading ...
29
OPERATION
ENGLISH
pocket and charge it using the charging
station.
3
Press the release button and separate the
extension pipe.
4
Hang the nozzle on the nozzle hook.
Separating the Battery Pocket
Separate the battery pocket by pressing the PUSH
button on the bottom of the battery pocket and
sliding it upward off the mop nozzle.
WARNING
• Do not separate the water tank from the hot
mop nozzle or add water to the water tank while
the power is on or cleaning in progress. Doing so
may result in burns due to steam or hot water.
• Never turn the hot mop nozzle upside down, tilt
or shake it while the power is on, while cleaning,
or immediately after cleaning is finished. Steam
or hot water may leak and cause burns.
• After cleaning, separate the mop pads from the
hot mop nozzle after letting it cool sufficiently.
Touching the hot mop nozzle or the mop pads
before they are sufficiently cooled may result in
burns.
• After steam cleaning, hot steam may become
water droplets and hot water may flow from the
inlet. After cooling the product sufficiently, clean
the nozzle and store the product in the charging
station.
NOTE
• If there is no water in the water tank, no steam
will be produced. Fill the water tank with water
and attach the pre wet mop pads before use.
• When the hot mop nozzle is turned on and left in
place, no steam will come out in order to prevent
damage to the floor.
Loading ...
Loading ...
Loading ...