Napoleon BIPRO500RBNSS-3-PL Manual

Loading ...

www.napoleon.com

N415-0541CE-GB-DE July 15.20

N570-0087 (1/4” -20 X 7/8”)

(Pre-installed at factory.)

APPLY A DAB OF SILICONE

TO EACH FLANGE TO

SECURE IN PLACE.

This grill is designed for masonry, NON-COM-

BuSTIBlE enclosures only when not installed with zero clearance liner, and must be installed and serviced by a

qualied installer to local codes.

1. Aach the side mounng brackets to each side of the grill using (4) 1/4 - 20 x 7/8” screws (N570-0087). Pre-

installed at factory.

2. lay the rear trim piece across the back of the opening. To keep it in place, a dab of silicone may be applied to

each wing of the rear trim.

3. lower the unit in place, the wings on the rear trim should be under the side mounng brackets. Connect the

ex supply line to the ng at the end of the manifold.

4. The enre installaon must be leak tested before operang the unit.

Loading ...

Napoleon BIPRO500RBNSS-3-PL Built-in Prestige PRO 500 RB with Infrared Rear Burner