Napoleon BIPRO500RBNSS-3-PL Manual

Loading ...

www.napoleon.com

N415-0541CE-GB-DE July 15.20

WARNING! Always wear protecve gloves and safety glasses when cleaning your grill.

WARNING! Turn o the gas at the source and disconnect the unit before servicing. To avoid the

possibility of burns, maintenance should be done only when the grill is cool. A leak test must be

performed annually and whenever any component of the gas train is replaced or gas smell is present.

Maintenance Instrucons

We recommend this gas grill be thoroughly inspected and serviced annually by a qualied service person.

At all mes keep the gas grill area free from combusble materials, gasoline and other ammable vapors

and liquids. Do not obstruct the ow of venlaon and combuson air. Keep the cylinder enclosure

venlaon openings (located on the cart sides and at the front and back of the boom shelf) free and

clear from debris.

Burner: The burner is made from heavy wall 304 stainless steel, but extreme heat and a corrosive

environment can cause surface corrosion to occur. This can be removed with a brass wire brush.

CAUTION! Beware of Spiders.

Spiders and insects are aracted to the smell of propane and natural gas. The burner is equipped with an

insect screen on the air shuer, which reduces the likelihood of insects building nests inside the burner

but does not enrely eliminate the problem. A nest or web can cause the burner to burn with a so yellow

or orange ame or cause a re (ashback) at the air shuer underneath the control panel. To clean the

inside of the burner, it must be removed from the gas grill: Remove the screw (s) that aaches the burner

to the back wall. Slide the burner back and up wards to remove. Cleaning: use a exible venturi tube

brush to clean the inside of the burner. Shake any loose debris from the burner through the gas inlet.

Check the burner ports and valve orices for blockages. Burner ports can close over me due to cooking

debris and corrosion, use an opened paperclip or the supplied port maintenance bit to clean them. Drill

out blocked ports using this drill bit in a small cordless drill. The ports are easier to clean if the burner is

removed from the grill, but it can also be done with the burner installed. Do not ex the drill bit when

drilling the ports, as this will cause the drill bit to break. This drill is for burner ports only, not for the brass

orices (jets) which regulate the ow into the burner. Take care not to enlarge the holes. Ensure the insect

screen is clean, ght, and free of any lint or other debris.

Reinstallaon: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when

installing. Replace sear plate mount and / or ghten screws to complete reinstallaon.

WARNING! Regulator Hose (when applicable): Check for abrasions’, melng, cuts, and cracks in the

hose. If any of these condions exist, do not use the gas grill. Have the part replaced by your Napoleon

Gas Grill dealer or qualied gas installer.

WARNING! When reinstalling the burner aer cleaning it is very

important that the valve/orice enters the burner tube before lighng your

gas grill. If the valve is not inside the burner tube a re or explosion could

occur.

Aluminum Casngs: Clean casngs periodically with warm soapy water. Aluminum will not rust, but high

temperatures and weathering can cause oxidaon to occur on aluminum surfaces. This appears as white

spots on the casngs. To renish these areas, clean rst and sand lightly with ne sandpaper. Wipe the

surface to

remove any residue and paint with high temperature barbecue paint. Protect surrounding

areas from over-spray. Follow the manufacture’s direcons for curing.

Loading ...

Napoleon BIPRO500RBNSS-3-PL Built-in Prestige PRO 500 RB with Infrared Rear Burner