Loading ...
Loading ...
Loading ...
IMPORTANT SAFETY INSTRUCTIONS
Damage to the oven can compromise your safety. Check the oven
for visible signs of damage. Do not use a damaged oven.
Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronized
with the grid power supply (e.g., island networks, back-up systems) is
possible. A prerequisite for operation is that the power supply system
complies with national and local codes.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronized with the grid power supply, or these measures must be
replaced by equivalent measures in the installation.
The electrical safety of this appliance can only be guaranteed when
correctly grounded. It is essential that this basic safety requirement is
fulfilled. If in doubt, the electrical installation should be checked by a
qualified electrician.
Proper installation: Make sure that your appliance has been installed
correctly and that it has been grounded by a qualified technician.
The connection data (voltage and frequency) on the data plate of
the oven must match the domestic electrical supply in order to avoid
the risk of damage to the oven. Compare this before connecting the
appliance to the domestic electrical supply. If in any doubt, consult a
qualified electrician.
Power bars and extension cords do not guarantee the required
safety of the appliance. Do not use these to connect the oven to the
power supply.
For safety reasons, only use the oven when it has been fully
installed.
This appliance must not be used in a non-stationary location (e.g.,
on a ship).
Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the oven will endanger your safety and may lead to
appliance malfunctions.
Do not open the oven housing under any circumstances.
6
Loading ...
Loading ...
Loading ...