Loading ...
Loading ...
Loading ...
LED Multi-Media Display User Manual
13
2.6 Set Signal Connection
Set signal line connection according to the actual receiving card connection between LED cabinets.
Steps
Note
After setting the video wall scale, the LED screen will show the signal line connection. The signal
connection via the client must match with the actual screen connection.
1. Go to LED Settings → Screen Control → Signal Connection → Signal Connection.
2. Select the device to be set from the device list.
Figure 2-12 Set Signal Connection
3. Click Display Line.
The location prompt of each screen will show on the screen.
4. Select a sending port to connect.
Note
● Connect the signal line according to the location prompt on each screen. If the prompt is 2-1,
the screen is the first screen to connect to No. 2 sending port.
● Signal line connection should be the same as the actual screen connection.
5. Connect signal cables.
Loading ...
Loading ...
Loading ...