Loading ...
Loading ...
Loading ...
LED Multi-Media Display User Manual
7
Note
If you do not check Add Offline, you cannot add the offline device(s).
Synchronize Time
Check Synchronize Time to synchronize the device time with the PC
running the client after adding the device to the client.
Parameters Self-
Check
If you enable Parameters Self-Check, the device will detect some of
the sending/receiving card parameters. If abnormal parameters are
found, the device will configure parameters automatically and record
them in log.
6. Click Add to add the device and exit from the interface. Or click Add and New to save the
settings and continue to add other devices.
2.2.3 Add Device by IP Segment
If the devices share the same port No., user name, and password, and their IP addresses range in
the same IP segment, you can add them to the client by specifying the start IP address and the end
IP address, port No., user name, password, etc. of the devices.
Steps
1. Click Device Management.
2. Click Add in Device Group list.
3. Select Adding Mode as IP Segment.
Loading ...
Loading ...
Loading ...