Loading ...
Loading ...
Loading ...
LED Multi-Media Display User Manual
9
Note
If you do not check Add Offline, you cannot add the offline device(s).
Synchronize Time
Check Synchronize Time to synchronize the device time with the PC
running the client after adding the device to the client.
Parameters Self-
Check
If you enable Parameters Self-Check, the device will detect some of
the sending/receiving card parameters. If abnormal parameters are
found, the device will configure parameters automatically and record
them in log.
6. Click Add to add the device and exit from the interface. Or click Add and New to save the
settings and continue to add other devices.
2.2.4 Import Devices in Batch
You can add multiple devices to the client in batch by entering the device parameters in a pre-
defined CSV file.
Steps
1. Click Device Management.
2. Click Add in Device Group list.
3. Select Adding Mode as Batch Import.
Figure 2-7 Import Devices in Batch
4. Click Export Template and save the pre-defined template (CSV file) to your PC.
5. Open the exported template file and enter the required information of the devices to be added
on the corresponding column.
Loading ...
Loading ...
Loading ...