Loading ...
Loading ...
Loading ...
Transportation, storage and disposal en-us
39
Issue Cause and troubleshooting
Fabric softener remains in the
detergent drawer.
The use of fabric softener is not supported for the selected program.
▶ Before washing, check whether the use of fabric softener is supported for the
selected program.
→
"Programs", Page20
Water is leaking from below the
door.
Dirt on the door or seal causes leaks.
▶ Clean the door and the seal.
18.1 Emergency release
Releasing the door
Requirement:The drain pump is empty. →
Page29
1.
NOTICE:
Escaping water may cause material damage.
▶ Do not open the door if you can see water through
the glass.
Pull the emergency release downwards with a tool and
release.
a The door lock is released.
2. Insert the service flap and lock it into place.
3. Close the service flap.
Transportation, storage and disposal
19 Transportation, storage and
disposal
Transportation, storage and disposal
19.1 Removing the appliance
1. Turn off the faucet.
2. Empty the water inlet hose.
3. Put the appliance into standby mode.
→
"Put the appliance into standby mode", Page26
4. Unplug the appliance's mains plug.
5. Drain the water.
→
"Cleaning the drain pump", Page29
6. Detach the hoses.
19.2 Inserting the transit bolts
Secure the appliance before transportation using transit
bolts in order to prevent transport damage.
1. Use a screwdriver to remove the 4 cover caps.
Keep the cover caps.
2. Insert the 4 transit bolts.
→
"Removing the transit bolts", Page9
19.3 Using the appliance again
▶ For further information, see
→
"Installation and connection", Page8
and
→
"Starting an empty washing cycle", Page11
.
19.4 Disposal of your old appliance
Environmentally compatible disposal allows valuable raw
materials to be recycled.
WARNING
Children can lock themselves in the appliance, thereby
putting their lives at risk.
▶ Do not install the appliance behind a door as this may
obstruct the appliance door or prevent it from opening.
▶ With redundant appliances, pull out the mains plug of
the power cord, cut through the power cord and remove
the appliance door.
1. Unplug the appliance from the power supply.
Loading ...
Loading ...
Loading ...