Loading ...
Loading ...
Loading ...
Basic Operation en-us
25
3. Insert the measuring aid.
4. Insert the detergent drawer.
13.7 Use the measuring aid for liquid
detergent
To add liquid detergent, you can use a measuring aid in
the detergent drawer.
1. Pull out the detergent drawer.
2. Slide the measuring aid forwards.
3. Fold the measuring aid down and click it into place.
4. Push in the detergent drawer.
13.8 Adding detergent and care product
Notes
¡ Do not use the measuring aid for liquid detergent for gel
detergents, washing powder, or if Prewash or "Ready
in" time are activated.
¡ Observe the information about detergents and care
products →
Page23
.
1. Pull out the detergent drawer.
2. Pour in the detergent.
→
"Detergent drawer", Page13
3. If required, add the care product.
4. Push in the detergent drawer.
13.9 Starting the program
Requirement:A program has been set.
→
"Setting a program", Page23
▶ Press .
a The drum rotates and load detection takes place. This
can take up to 2 minutes, after which water enters the
drum.
a The display shows the program duration or the program
end time.
a After the program has ended, the display shows: End.
13.10 Soaking laundry
Note:No additional detergent is required for soaking. The
appliance uses the filled detergent for soaking and
washing.
Requirements
¡ The laundry is placed in the appliance.
→
"Loading laundry", Page24
¡ A program has started.
→
"Starting the program", Page25
1. Press approx. 10minutes after the program start.
The program pauses and the laundry can soak.
2. Press after the required soaking time.
13.11 Adding laundry
After the program starts, you can remove or add laundry
depending on the program status.
1. Press .
The appliance pauses.
Note:If you want to add laundry, follow the instructions
on the display.
→
"Display", Page17
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press .
Loading ...
Loading ...
Loading ...