Loading ...
Loading ...
Loading ...
Software Manual
90
(3) Printer Connection Settings << TSP100IIIBI only>>
If you enable the "Always enabled" setting, the printer will remain constantly connected.
Because the processing of port-open and port-close for each printing process is no longer
required, the time until the printer starts printing will be reduced.
If the following conditions all apply, it is recommended to use this setting.
-You are using the printer and the host device as a pair.
-You are using a Windows driver.
-You want to reduce the time before the printer starts printing.
Notes:
• If the "Always enabled" setting is enabled, you cannot connect from another device.
If you are using an operating system other than Windows and are connecting from multiple
devices, disable the "Always enabled" setting.
• If the "Always enabled" setting is enabled, you cannot use an application other than
futurePRNT even with the same device.
Available:
- Printing via a Windows printer driver, OPOS, JavaPOS and Serial Ports.
Unavailable:
- [Configuration] and [Check Connection] in the TSP100 LAN / Bluetooth Setup Tool
screen.
- Communication with a printer that used StarIO.
Loading ...
Loading ...
Loading ...