Loading ...
Loading ...
Loading ...
Software Manual
114
● When "OPOS CCO" or "Star CO" is registered as a control object:
"OPOS CCO" or "Star CO" is selected in the ‘Control Object Registration’ field.
(1) Click “Add New”.
<When "Star CO" is selected>
(2) The following dialog box appears. Enter the name of the printer to be added, select the print
width and click “OK”.
■ 180dpi compatible mode
When 180dpi compatible mode is checked, the left and right margins are automatically
adjusted.
(3) A printer is added. Click “Apply Changes” to register the new printer device.
Notes: 1) The print width must match between the setting above and general settings (refer to
"4.3.2. Print Width in General Settings"). If they do not match, the print width
specified in general settings is automatically changed to the setting above.
2) The print width can be specified only when a printer is added.
To change the selected setting value, delete the device, and re-execute the steps to add
a printer.
Loading ...
Loading ...
Loading ...