Loading ...
Loading ...
Loading ...
Software Manual
9
(5) The TSP100 LAN / Bluetooth Setup Tool screen is displayed.
If the printer you want to install is not listed in the LAN printer list, click [Discovery].
The factory network settings of the TSP100LAN printer are as follows.
IP address: 0.0.0.0 (Unassigned)
Subnet mask: 0.0.0.0 (Unassigned)
Default gateway: 0.0.0.0 (Unassigned)
Use DHCP: ENABLE (Selected)
For environments where the DHCP server is not available:
If at least one of the following conditions applies, you will not be able to configure an IP address for
any printers (with factory default settings) which have no IP address assigned.
- Using F/W V.2.0 or older
- Using CD Vol. 5.4 or older
Before starting operations, specify the IP address for the printer, referring to "
Chapter 6 Guideline
for Using Ethernet Environment".
Loading ...
Loading ...
Loading ...