Loading ...
Loading ...
Loading ...
©2021 Hestan Commercial Corporation
8
EN
ELECTRICAL CONNECTIONS
ELECTRICAL SHOCK HAZARDELECTRICAL SHOCK HAZARD
Disconnect power before installing or servicing appliance. Failure to do so can
result in electrical shock or death.
ELECTRICAL GROUNDINGELECTRICAL GROUNDING
This appliance must be grounded. Grounding reduces the risk of electric shock
in the event of a short circuit. Grounding through the neutral conductor is
prohibited for new branch circuit installations (1996 NEC), mobile homes, and recreational vehicles,
or in an area where local codes prohibit it. This rangetop has been setup at the factory for a 3-wire
connection.
CAUTION
Improper grounding will cause malfunctions in the unit. This can damage
the appliance and create a shock hazard condition.
ELECTRICAL CONNECTIONELECTRICAL CONNECTION
The appliance must be on its own dedicated circuit - 240 VAC, Single Phase, 60 Hz, with a current
rating as shown in the model number listing on page 2. The installation must be done in accordance
with local codes, or in the absence of local codes, it must be installed in accordance with the National
Electrical Code, ANSI/NFPA 70.
NOTICE
This rangetop does not require a neutral connection. If the rangetop is to be completely enclosed in
a cabinet, feed the rangetop cable through the opening in the cabinet.
Make the electrical connection following the appropriate steps for your installation.
The appliance is provided with a 3/4” flexible conduit which is 3 feet long [1 m] to allow slack for
serviceability. DO NOT CUT THE CONDUIT. It should be connected directly into a junction box
with a UL or CSA-listed conduit connector. Once connected to the junction box, arrange any excess
conduit under the unit with tie-wraps to keep the conduit out of the way of any drawers or other
objects in the cabinet.
• A dedicated time-delay fuse or circuit breaker is recommended.
• Do not ground to a gas pipe. Do not have a fuse in the grounding circuit.
• Both supply (phase) lines must be protected by fuses or a circuit breaker.
For both US and CANADA installations: This appliance is equipped with copper lead wires and must
be connected to copper wires only. Improper connection of aluminum house wiring can result in a
fire or shock hazard. Use only connectors designed and certified for connecting to aluminum wire,
and installed by a qualified electrician.
Loading ...
Loading ...
Loading ...