Loading ...
Loading ...
Loading ...
Troubleshooting en
41
2.
Push down on the intermediate pane around
,
slide the retainer in at an angle and push down
until it clicks into place.
a The retainer has been inserted.
3.
Centre the inner pane on the appliance door.
4.
Insert the inner pane into the door cover at an angle
towards the back .
5.
Insert the retaining bracket for the inner pane into
the opening .
6.
Screw both screws back in on the left and right of
the appliance door.
Troubleshooting
25 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ If the appliance is defective, call Customer Service.
→"Customer Service", Page44
WARNING‒Risk of electric shock!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ Only use genuine spare parts when repairing the
appliance.
▶ If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
25.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
Electronics fault
1.
Disconnect the appliance from the power supply for at least 30 seconds by switching off
the fuse.
2.
Reset the basic settings to the factory settings.
→"Basic settings", Page26
Function does not ap-
pear in the display.
Classic Mode is activated and hides the function.
▶
Remove 1 or 2 Twist Pad Flex control elements.
Loading ...
Loading ...
Loading ...