Loading ...
Loading ...
Loading ...
AXIS Q6035–E PTZ Dome Network Camera
Accessing the product
Configure capture mode
Capturemodedefine s how image data is taken from the image sensor in regards to re solution and frame rate , p rioritizing either one
or the other. Capture mode is set the first time the product is accessed. Select the desired Capture Mode from the drop-down list
and click OK.Seealso
Capture mode, on page 15
The Live View page
If the Axis product has been customized to meet specific requirements, not a ll the ite ms des cribe d below will appear in the Live View
page. The following provides an overview of each available button.
Controls on the Live View page
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Stream
profiles are configured under Video > Stream Profiles.See
Stream Profiles, on page 15
.
The Manual Trigger b utton can trigger an event directly from the Live View page. The button is con figured under
Live View Config > Action Buttons.
Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your
computer. This button is primarily intended for use when the AXIS Media Control view er toolbar is not available.
Enable this button from Live View Config > Action Buttons.
Activate the product’s fans with this button. Enable this button from Live View Config > Action Buttons. The Fan
button is activated automatically. Press this button to activate it manually.
Activate the product’s heater with this button. Enable this button from Live View Config > Action Buttons.
Enable or disable the Gatekee per by selecting On or Off from the drop-down list. The G atekeeper is configured
under Setup > Events > Gatekeeper,see
page 28
.
AXIS Media Control viewer toolbar
The AXIS Media Control viewer toolbar is available in Interne t Explorer only. See
AXIS Media Control (AMC), on page 10
for more
information. The toolbar
displays the following buttons:
8
Loading ...
Loading ...
Loading ...