Loading ...
Loading ...
Loading ...
en-us Preventing material damage
6
Preventing material damage
2 Preventing material damage
Preventing material damage
NOTICE:
Harsh chemicals such as bleach-based products can
damage your dishwasher.
▶ Do not use harsh chemicals such as bleach-based
products to clean your dishwasher.
Certain cleaning products may damage the appliance.
▶ Do not use a steam cleaner.
▶ So as not to scratch the finish on the appliance, do not
use sponges with a rough surface or abrasive cleaning
agents.
Avoid stainless steel polish
▶ Do not use stainless steel polish on an anti-fingerprint
finish or a black stainless finish.
Escaping water vapor can damage cabinetry.
▶ When the program ends, let the appliance cool down a
bit before opening the door.
Protect your appliance from the elements.
▶ Protect against freezing to avoid possible damage to
the fill valve. Damage caused by freezing is not covered
by the warranty.
Environmental protection and energy-saving
3 Environmental protection and
energy-saving
Environmental protection and energy-saving
3.1 Saving energy
If you follow these instructions, your appliance will use
less power and water.
Use the Normal program.
a
The Normal program is energy-efficient and
environmentally friendly.
→
"Dishwasher Cycles", Page10
3.2 AquaSensor
The AquaSensor is an optical measuring device (light
barrier) which measures the turbidity of the washing water.
You can save water with the AquaSensor.
The operation of the AquaSensor depends on the selected
cycle. If the soiling level is high, the washing water is
drained off and replaced with fresh water. If the soiling
level is lower, the washing water is used in the next rinse,
so reducing water consumption by 3-6 liters. In the Auto
cycles the temperature and run time are additionally
adjusted to the level of soiling.
3.3 AutoAir
The appliance door opens automatically during the drying
phase. This ensures a particularly economical drying
result.
For optimal drying results, wait until the end of the
program before unloading dishware. The wash cycle has
ended when no displays on the controls are lit.
If automatic door opening is deactivated, energy
consumption increases and the drying phase is usually
shortened.
This function can be set using the HomeConnect® app.
Loading ...
Loading ...
Loading ...