Loading ...
Loading ...
Loading ...
Troubleshooting en-us
29
Issue Cause and troubleshooting
Dishware is not dry. Water collects in recesses of dishware or silverware.
▶ Position dishware at an angle where possible.
The combined detergent used has a poor drying performance.
1. Use rinse aid to improve drying performance.
2. Use a different combined detergent with a better drying performance.
Extra Dry/intensive drying not activated to improve drying performance.
▶ Activate Extra Dry/intensive drying.
Dishware removed too early or drying process not yet ended.
1. Wait until the program ends.
2. Only remove dishware 30minutes after the program has ended.
Rinse aid used has a limited drying performance.
▶ Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Appliance door does not open automatically at the end of the program
▶ Adjust the appliance door as described in the installation instructions.
The door gap must be at least 2.75" to 4".
Silverware is not dry. Silverware not arranged properly in the silverware basket or silverware drawer.
Droplets can form on the contact points of silverware.
1.
Arrange silverware individually where possible. →
Page17
2. Avoid points of contact.
Appliance interior still wet after
wash cycle.
Not an error. Condensation drying creates water droplets in the tub. This is normal.
Moisture in the air condenses on the inside walls of the appliance, runs off, and is
pumped out.
No action required.
Food remnants on dishware. Dishware was placed too close together or rack is overfilled.
1. Arrange dishware with sufficient space in between.
The spray jets must reach the surfaces of the dishware.
2. Avoid points of contact.
Spray arm rotation of the lower spray arm is blocked.
▶ Arrange dishware so it does not obstruct spray arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms →
Page25
.
Filters are dirty.
▶ Clean the filters.
→
"Cleaning filters", Page24
Filters are inserted incorrectly and/or not engaged.
1. Insert the filters properly.
→
"Filter system", Page24
2. Twist filters into place.
Selected wash cycle is too light.
▶ Select a more intensive wash program.
Loading ...
Loading ...
Loading ...