Loading ...
Loading ...
Loading ...
Controls & Features
4
11
Log Dislodger
Control Handle
Log Tray
Vertical
Beam Lock
Dipstick
Horizontal
Beam Lock
Jack Stand
Hitch Coupling
Safety Chain
NOTE: This Operator’s Manual covers several models. Features may vary
by model. Not all features in this manual are applicable to all models and
the model depicted may differ from yours.
Engine Controls
See the Engine Operator’s Manual for the location and function of the
controls on the engine.
Beam Locks
The beam locks are used to secure the beam in either the horizontal
position or the vertical position. The vertical beam lock is located next
to the engine. The horizontal beam lock is located on the beam support
latch bracket.
Control Handle
Use the control handle to move the log splitter wedge forward and
backward along the beam. It has three positions; FORWARD, NEUTRAL
and REVERSE. See the Operation section for instructions.
Vented Dipstick
Use the vented dipstick to check the hydraulic fluid level.
Log Dislodger
The log dislodger is designed to remove any partially split wood from
the wedge while it is retracting. This may occur while splitting large
diameter wood or freshly cut wood.
Log Tray
The log tray is designed to stabilize the log after it is split.
Hitch Coupling
Use the hitch coupling to attach the log splitter to a towing vehicle for
transportation.
Jack Stand
The jack stand supports the log splitter while in the operating position.
Safety Chain
The safety chains are hooked to the towing vehicle for transportation.
Loading ...
Loading ...
Loading ...