Loading ...
Loading ...
Loading ...
Professional Series Thermal Imagers
Menus
25
LaserSharp Auto Focus System
The Laser Pointer/Distance Finder on the Imager is both a sighting aid and a part of the LaserSharp Auto
Focus System.
*W Warning
To prevent eye damage and personal injury, do not look into the laser. Do not point laser
directly at persons or animals or indirectly off reflective surfaces.
To use the LaserSharp Auto Focus System:
1. Select Camera > LaserSharp Auto Focus > On.
2. Point the Imager at the target.
3. Pull and hold the Secondary Trigger.
* shows at the top of the display.
4. Position the red laser dot on the target.
5. Release the Secondary Trigger.
The auto focus system automatically focuses on the object.
Note
The laser pointer is aligned parallel to the infrared lens. In AutoBlend Mode, the laser pointer dot is
positioned just above the center point marker on the display. It can be easier to use your eyes to locate
the visible laser pointer on the target not on the display.
Video
The video controls include stop, rewind, fast forward, and pause/play functions. The thermal scene and
complexity of the recorded data affects the amount of time available to record a video. The video capture format
is set in the Settings menu. For more information, see File Format.
Record Video
To record:
1. Select Camera > Video.
2. Select Video/Audio or Video ONLY.
3. Touch Record Video to set up the Imager to record a video.
G shows on the display.
4. Pull and release the Primary Trigger to start recording.
shows on the display. The elapsed time shows at the bottom of the display.
5. Pull and release the Primary Trigger to stop recording.
6. Push
to end the recording session.
7. Push
to save the video file.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...