Loading ...
Loading ...
Loading ...
Professional Series Thermal Imagers
Menus
17
5. Push
to select Position.
6. Push
W / X / Y / Z to move the Spot Box location on the image.
7. When you are satisfied with the size and position of the Spot Box, push
to set the change and select the
next Spot Box.
8. Repeat for each Spot Box.
9. When you are satisfied with the size and position of each Spot Box, push
to set the change and exit the
menu.
Spot Markers
Use fixed-temperature spot markers to highlight a region on the display before you save an image.
To set a marker:
1. Select Measurement > Markers.
2. Select the number of markers.
3. Push
to set the number of markers and go to the Move Marker display.
shows on the display and the labels on the function buttons change to Done, Next, and Cancel.
To change the marker position on the display:
1. Push
W / X / Y / Z to move the marker location on the image.
2. When you are satisfied with the position of the marker, push
to set the change and select the next
marker.
When the position of the marker is set, the marker symbol changes from
to .
3. Repeat for each marker.
4. When you are satisfied with the position of each marker, push
to set the change and exit the menu.
Delta-T
Use to set the center point or a spot marker to use as a temperature reference mark.
To set a temperature reference mark:
1. Select Measurement > Markers > Delta-T.
2. Select the center point or spot marker to set as the reference mark.
and the temperature shows on the display next to the reference mark.
A delta symbol (
) and the temperature difference relative to the temperature of the reference mark shows
next to the other spot markers.
Note
The center point can be a temperature reference mark, but it cannot have a delta symbol. It is either the
main reference mark or it is not a delta reference at all.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...