Loading ...
Loading ...
Loading ...
Professional Series Thermal Imagers
Menus
23
To use the distance measurement feature:
1. Turn on the distance feature and select the units to show on the display.
2. Point the Imager at the target.
3. Pull and hold the Secondary Trigger.
* shows at the top of the display.
4. Position the red laser dot on the target.
5. Release the Secondary Trigger.
The distance measurement shows on the bottom of the display. The measurement shows as “- - - -” when
the Imager cannot take a measurement. If this is the case, use a tripod or steady the Imager and retake the
measurement. If there is excessive laser movement, an error message shows on the display due to an out of
range distance.
Camera Menu
Table 12 lists the options in the Camera menu.
Table 12. Camera Menu
Option Menu Option Description
LaserSharp
Autofocus
On
Turns on LaserSharp Autofocus to automatically focus on a target.
See LaserSharp Auto Focus System.
Off
Turns off LaserSharp Autofocus to use the Advanced manual focus.
See LaserSharp Auto Focus System.
Backlight <options> Select to set the brightness level of the display.
Torch -- Turns on/off the built in flashlight.
Video
Video/Audio Select to record video and audio when Record Video is selected.
Video ONLY Select to record video only when Record Video is selected.
Record Video Select to start recording a video. See Video.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...