Loading ...
Loading ...
Loading ...
18 Connecting the appliance
WARNING
Incorrect connection!
Risk of fire.
u
Do not use an extension cord.
u
Do not use a multipoint connector strip.
NOTICE
Incorrect connection!
Damage to the electronics.
u
Do not connect the appliance to a stand-alone
inverter, e.g. solar power systems and petrol genera‐
tors.
Note
Only use the mains cable supplied.
u
A longer mains cable can be ordered from Customer
Service.
Fig. 53 *
For appliances with a width of 600 mm (23.62 in):*
a* b* c* d* G*
~
1800 mm
(70.87 in)
~
1400 mm
(55.12 in)
~
2100 mm
(82.68 in)
~
200 mm
(7.87 in)
Appli‐
ance
plug
For appliances with a width of 750 mm (29.53 in):*
a* b* c* d* G*
~
1725 mm
(67.91 in)
~
1325 mm
(52.17 in)
~
2100 mm
(82.68 in)
~
200 mm
(7.87 in)
Appli‐
ance
plug
Make sure that the following requirements are fulfilled:
- The type of current and voltage at the installation
site complies with the information on the serial tag .
- The socket is grounded and fused in accordance
with regulations.
- The tripping current for the fuse is between 10 and
16 A.
- The socket is easily accessible.
- The socket is not located behind the appliance but in
areas a or b Fig. 53 (a, b, c).
u
Check the electrical connection.
u
Insert the appliance plug Fig. 53 (G) on the rear side
of the appliance. Ensure that they latch into place
correctly.
u
Connect the mains plug to the power supply.
w
The Liebherr logo appears on the screen.
w
The display switches to the standby symbol.
Connecting the appliance
* Depending on model and options 25
Loading ...