Loading ...
Loading ...
Loading ...
Fig. 10
u
Loosen the soft stop unit screw with a T15 screw‐
driver approx. 14 mm (0.55 in). Fig. 10 (1)
u
Insert a screwdriver behind the soft stop mechanism
on the handle side and rotate the unit forwards.
Fig. 10 (2)
u
Pull out the soft stop unit. Fig. 10 (3)
13.2 Removing the bottom soft stop
damper
Fig. 11
u
Open the bottom door.
NOTICE
Risk of damage!
If the door seal is damaged the door may not close
properly and the level of cooling is insufficient.
u
Do not damage the door seal with the screwdriver!
u
Unlatch the panel with a slotted screwdriver and
swivel it to one side Fig. 11 ().
Fig. 12
CAUTION
Crushing hazard from the folding bracket!
u
Engage the locking device.
u
Engage the locking device in the opening Fig. 12 ().
Fig. 13
u
Remove the bearing bracket cover and push it along
the hinge. Fig. 13 (1)
u
Lift the bolt with a finger or screwdriver from below.
Fig. 13 (2)
u
Insert the screwdriver under the bolt head and
remove it. Fig. 13 (3)
Reversing the door
10 * Depending on model and options
Loading ...
Loading ...
Loading ...