Loading ...
Loading ...
Loading ...
AXIS Q1604 Network Camera
Accessing the product
When using 50 Hz, the maximum frame rate is limited to 25 fps .
Note
Power line frequency is different in different geographic regions. In the Americas, 60 Hz is u sually used; most other parts of
the world use 50 Hz. Local variations may apply, always check with the local authorities.
See also
Capture Mode, on pag e 19
.
The Live View page
If the Axis product has been customized to meet specific requirements, not all the ite ms describe d below will appea r in the Live View
page. The following provides an overview of each available button.
Controls on the Live View page
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Stream
profiles are configured under Video & Audio > Stream Profiles.See
Stream Profiles, on page 18
.
Click Pulse to activate the output for a defined period of time, such as switching on an external light for 20 seconds .
Click the Active/Inactive buttons to manually start and stop a connected device — e.g. switch an external light
on and off.
The Manual Trigger button can trigger an event directly from the Live View page. The button is configured under
Live View Config > Action Buttons.
Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in J PEG format on your
computer. This button is primarily intended for use when the AXIS Media Control view
er toolbar is not available.
Enable this button from Live View Config > Action Buttons.
The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio
clip and click the Play button.
AXIS Media Control viewer toolbar
The AXIS Media Control viewe r toolbar
is available in Internet Explorer only. Se e
AXIS Media Control (AMC), on page 13
for more
information. The toolbar d ispl ays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the
media stream.
The Snapshot button t
akes a snapshot of the video image. The location where the image is saved can be specified
in the AMC Control Panel.
11
Loading ...
Loading ...
Loading ...