Loading ...
Loading ...
Loading ...
56 TROUBLESHOOTING
Operation
1F
FILTER ERROR
The appliance is being operated without the lint filter.
• Insert the lint filter completely.
•If
1F recurs, call for service.
Ps
POWER SUPPLY
ERROR
Power cord is connected incorrectly.
• Check the connection of the power cord to the terminal block.
C=]<-> ENd
The dryer is paused or the dryer's drum rotates periodically.
• Wrinkle Care option is selected. (on some models)
• Turn off the appliance and unload all of the laundry from the appliance.
Problem Possible Cause & Solution
Problem Possible Cause & Solution
The appliance will
not turn on.
Power cord is not properly plugged in.
• Make sure that the power plug is securely plugged into a grounded outlet matching the
appliance's rating plate.
House fuse is blown, circuit breaker has tripped, or power outage has occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a
circuit overload, have it corrected by a qualified electrician.
The appliance does
not heat.
House fuse is blown, circuit breaker has tripped, or power outage has occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a
circuit overload, have it corrected by a qualified electrician.
Selected cycle does not use heat.
• Some cycles default to unheated or air drying. Select a cycle that allows heated drying.
Water leaks. The water container hose or the optional drain hose is not connected correctly.
• Connect the water container hose or the optional drain hose correctly.
The door is closed while clothes or foreign substance is caught in the door.
• Check if clothes or foreign substance is caught in the door before using the appliance. If
water leaks continuously, contact the LG Electronics Customer Information Center.
The appliance runs
and pauses by itself
after the drying cycle
finishes.
This is normal operation for the Wrinkle Care option.
• Check to see if the Wrinkle Care option has been selected. The option is designed to
prevent creases that are formed when the clothes are not unloaded promptly after the
drying cycle. When the option is set, the appliance runs for 10 seconds and pauses for 5
minutes. The option runs for up to 2 hours.
Drying ended earlier
than the initial
control panel time.
The clothes are dried according to the Dry level or Dry mode setting.
• If the humidity or temperature in the drum reaches the product setting, the dry cycle may
end earlier than the control panel time.
Clothes take too long
to dry.
Load is not properly sorted.
• Separate heavy items from lightweight items. Larger and heavier items take longer to dry.
Light items in a load with heavy items can fool the sensor because the light items dry
faster.
Large and heavy fabrics are loaded.
• Heavy fabrics take longer to dry because they tend to retain more moisture. To help
reduce and maintain more consistent drying times for large and heavy fabrics, separate
these items into smaller loads of a consistent size.
Loading ...
Loading ...
Loading ...