Loading ...
Loading ...
Loading ...
46 MAINTENANCE
3 Press the Start/Pause button.
• This function operates for about 3 hours.
4 Open the dryer door and leave it open to
allow air to circulate in the drum.
WARNING
• For safety reasons, do not allow children or
animals to climb into the appliance. Doing so
could cause damage or injury.
Using Condenser Care Feature
The appliance automatically cleans built-up lint off
of the condenser using water condensed from the
drying process. If needed, the condenser can also
be cleaned manually.
CAUTION
• Remove all of the clothes from the appliance.
• The condenser is cleaned automatically.
• If you want to clean it manually, contact the
service center.
• If the product is disassembled arbitrarily,
resulting in a malfunction or injury, LG does not
assume responsibility and free service is not
provided.
1 Open the dryer door and pull out both the
inner and outer filters.
2 Carefully pour 34 oz. (1 liter) of clean water
into the lint filter compartment and then
reinsert both lint filters.
• Do not pour the water quickly as it will spill
out.
• Pouring more that 51 oz. (1.5 liters) of water
into the compartment will cause water to
leak out.
3 Turn on the appliance.
4 Press the Condenser Care button.
5 Press the Start/Pause button to start
cleaning the condenser.
• The condenser cleaning process takes
about 1 hour.
6 Open the dryer door after the cleaning is
finished and leave it open to allow air to
circulate and thoroughly dry the drum.
WARNING
• For safety reasons, do not allow children or
animals to climb into the appliance. Doing so
could cause damage or injury.
Care in Cold Climates
Thawing out the Accessories
CAUTION
• Wear gloves and take care to avoid burning
yourself with hot water.
Frozen Water in Drain Hose
Wrap the drain hose in a towel soaked in hot water
(140 ℉ / 60 ℃).
Running the Thawing Mode
1 Turn on the appliance and press and hold the
More Time and Condenser Care buttons at
the same time for 3 seconds.
NOTE
•Only the Power and Start/Pause buttons work
when the thawing mode is activated.
• The thawing time cannot be changed manually.
• To deactivate the thawing mode, turn off the
appliance.
2 Press the Start/Pause button to start the
thawing mode.
• Actual thawing time varies depending on
the installation environment such as
Loading ...
Loading ...
Loading ...