Loading ...
Loading ...
Loading ...
Steps
1.
Go to Network → General → PPPOE .
2.
Turn on Enable.
3.
Enter user name and password.
4.
Click Save.
What to do next
If you can get the dynamic IP, the PPPOE status is normal.
6.2.4 NAT
Two ways are provided for port mapping to realize the remote access via the cross-segment
network, UPnP™ and manual mapping.
Before You Start
Enable the UPnP™ funcon of your router if UPnP™ is required. When the device network working
mode is mul-address, the default device route should be on the same network segment as the
LAN IP address of the router.
Steps
1.
Go to Conguraon → Network → General → NAT .
Figure 6-5 NAT
2.
Turn on Enable.
3.
Select Mapping Type as Manual or Auto
Auto The port mapping items are read-only, and the external ports are set by the router
automacally. You can click Refresh to get the latest status of the port mapping.
Manual Select an external port type. Click
to edit External Port. You can use the default
external port No., or change it according to actual requirements. External Port
indicates the port No. for port mapping in the router.
Digital Video Recorder User Manual
36
Loading ...
Loading ...
Loading ...