Pneumatic creePer Stool with
adjuStable height Swivel Seat & back
reSt
Model no: Scr03b
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. Safety
warning! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this seat.
warning! Use the seat on level and solid ground, preferably concrete.
9 locate seat in a suitable working area.
9 Keep the seat clean and tidy in accordance with good workshop practice.
8 do not use the seat for any purpose other than that for which it is designed.
8 do not stand on the seat.
8 do not use the seat outdoors.
8 do not get the seat wet or use in damp or wet locations or areas where there is condensation.
8 do not clean the seat with any solvents which may damage the paint surface or the protective coating on the padded seat.
8 do not exceed maximum capacity of 150kg.
2. introduction
Fourleggedheavy-dutysteelconstructionwithablackpowdercoatnishforcorrosionresistance.Strengtheningringandmesh
insertforstability,alsoactsasafootrest.Ø410mmSwivelseatfeaturespneumaticheightadjustment(570to710mm),rotatesfully
through 360° and is padded with back rest for extra comfort.
3. SPecification
model no.: ............................................................... Scr03b
Capacity ....................................................................... 150kg
Height(s) ............................................................. 570-710mm
4. aSSembly
4.1. Unpack all parts before disposing of packaging material according to local
recycling regulations.
4.2. Invertframeandtthecastorstothelegbases.Notethelocationofthetwo
lockingcastors(g.1).
4.3. Insert gas strut into base frame.
4.4. Place seat on gas strut.
5. oPeration
5.1. Oncethestoolisassembled,compresstheheightadjustmentleverwhilsttheseatisunloaded.Thiswillallowtheseattoreachits
maximum height.
5.2. Toadjusttheheight,pulltheswitchleverslowlywhilstsittingontheseat.Releasetheleverwhenatthedesiredheight.
6. maintenance
6.1. If in constant use, check the tightness of all fixings on a weekly basis.
6.2. Thecastorwheelsaremaintenancefree;ensuretheyarealwaysabletorotateandswivelfreely.
6.3. Clean the seat cushion and trays with a moist cloth and mild detergent.
SCR03BIssue109/12/19
Original Language Version
©JackSealeyLimited
Referto
instructions
g.1
SCR03BIssue109/12/19
Original Language Version
©JackSealeyLimited
Sealey group, kempson way, Suffolk business Park, bury St edmunds, Suffolk. iP32 7ar
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
environment Protection
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
