Loading ...
Loading ...
Loading ...
9
FIGURE 1-3: CAMERA CONNECTIONS AND FEATURES 2/2
8. Micro-SD Card Slot: This slot is for inserting a micro SD card for extra file storage.
NOTE: An SDHC or SDXC card capable of a minimum write speed of 10 MB/sec is recommended for recording HD video.
Pelco also recommends the SD card's operating temperature range be suitable for the environment it is intended to be
used in.
9. Ethernet / PoE: The port in the middle is connected to a PoE cable. The other side of this cable is the RJ-45 Network
Port demonstrated on Figure 1-2 item #3.
10. LED Indicators
Green LED: With solid green, the LED indicates a live connection is established.
Orange LED: With flashing orange, the LED indicates data is being transmitted / received between camera and the
network.
11. Reset Button (R): Press the button for 1 second to reboot the camera.
12. Default (D): Press the button for 6 seconds to restore the camera’s settings back to the factory default.
13. Status LED: LED indicator for booting and firmware upgrade (Green/Red/Amber). The LED behavior is:
Boot Up: LED solid Red. After 2 ~ 3 seconds, then:
- Red to flashing Green if boot up is normal.
- Remains solid Red if an error occurs.
LED turns off 3 minutes after a successful boot.
Firmware Upgrade: LED flashing Amber when firmware upgrade is running.
8
9
11
12
10
14
13
Loading ...
Loading ...
Loading ...