Loading ...
Loading ...
Loading ...
14
2.3.3 Connecting the Cables
Based on your needs, connect the power cable to the power port via one of the following 3 options.
AC 24V: Connect a power cable that supplies AC24V power source to the terminal block, and then insert the terminal
block into the power port.
DC 12V: Connect a power cable that supplies DC12V power source to the terminal block, and then insert the terminal
block into the power port.
NOTE: The polarities should be matching when using DC12V power source.
PoE (Class 3): Connect an Ethernet cable terminated with RJ-45 connector to the PoE RJ-45 port for both power
supply and network connectivity purposes simultaneously.
NOTE:
a. If a Class I PoE adapter or switch is used to provide power, be sure that the power cord is firmly plugged into the
socket and confirm the main earth connection.
b. This product is intended to be supplied by a UL Listed Power Adapter or DC power source marked "L.P.S" (or
"Limited Power Source"), rated 24Vac, 1.1A or 12Vdc, 1.6A, Tma=50 degree C or 48Vdc, 350mA Gigabit
Passive PoE injector, 802.3af/at PSE.
c. Interconnecting cables for PoE is intended to be supplied by a UL Listed type CL3P, CL3R or CL3X, marked
“SUNLIGHT RESISTANT”, “SUN. RES.” or "SR." and "water resistant" or “W”.
Insert audio in/out cables and alarm in/out cables to the corresponding terminals of the camera if required.
FIGURE 2-6: CONNECTING THE CABLES
PoE
Terminal Block
AC24V
DC12V
Audio In/Out
Alarm In/Out
Loading ...
Loading ...
Loading ...