Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC 29
NOTE: The flashing indicating the pairing process will last approximately 10 s. You
could short-press the speed button on the gun to exit the pairing process any time.
4. The speed indicators on the washer and the gun will display three green lights
together for 3 s to indicate the pairing was successful, then display two green
lights.
5. If the pairing has failed, the speed indicators on the washer and the gun will flash
three green lights and then turn off.
Using the Remote Control
After the pairing is completed, press the speed button once on the gun, the 5-LED
fuel gauge and speed indicator will light up. Press the speed button again to actually
change the speed.
NOTE:
◾
The 5-LED fuel gauge and speed indicator will shut off when there is no further
action on the speed button of the gun within 10 s.
◾
The 5-LED fuel gauge indicates the battery-charge level. When two battery packs
are installed, it indicates the level of the battery pack with the higher charge.
◾
The speed indicator on the gun is always synchronized with the speed indicator
on the pressure washer unit.
SPEED SELECTION
◾
The speed of the pressure washer could be adjusted by the speed button on
either the washer or the paired gun.
◾
The speed of the pressure washer could be adjusted when the washer is powered
on or during spraying.
◾
Every time the speed button is pressed, the speed will toggle among high level,
TURBO level and low level. The speed indicator displays one green light, two
green lights, or three green lights to indicate the pressure washer running at low
speed, high speed, or TURBO speed, respectively.
NOTE: WHEN ONLY ONE BATTERY PACK IS INSERTED, THE TURBO SPEED COULD NOT
BE ACHIEVED AND EVERY TIME THE SPEED BUTTON IS PRESSED, THE SPEED WILL
TOGGLE BETWEEN HIGH LEVEL AND LOW LEVEL.
NOTE: If the pressure washer keeps operating at TURBO speed, the runtime per
charge may be affected.
Loading ...
Loading ...
Loading ...