Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC 23
CONNECTING THE FOAM CANNON
(Fig. 8)
The foam cannon is connected to the gun
directly.
Pull back the outer ring of the quick-
coupler end of the gun, and then attach
the foam cannon until you hear a “click”.
The outer ring of the quick-coupler will
move forward automatically, which
indicates the connection is established. Tug on the nozzle of the foam cannon to make
sure it is securely attached.
To disconnect, pull back the outer ring of the quick-coupler, and then pull out the foam
cannon.
CONNECTING THE SIPHON HOSE
(Fig. 9)
When using a water bucket (not provided)
as a source of water, connect the siphon
hose to the pressure washer.
1. Align the threaded end of the
siphon hose with the water inlet
port and tighten them securely by
screwing the knob of the water
inlet port (Fig. 9a).
2. Attach the filter to the quick-
coupler of the siphon hose and then
immerse the filter and the quick-
coupler fully into the water
(Fig. 9b).
NOTE: It is recommended to fully
ll the bucket with water BEFORE
inserting the lter and the quick-
coupler. This way the lter and the quick-coupler will properly immerse. They
may oat if inserted into the empty bucket prior to lling it with water.
8
9a
9b
Loading ...
Loading ...
Loading ...