Loading ...
Loading ...
Loading ...
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC24
CONNECTING TO THE GARDEN HOSE (NOT PROVIDED)
When using water faucet (not provided) as a source of water, connect the pressure
washer to a garden hose (not provided).
IMPORTANT: Always observe all local regulations when connecting hoses to the
water main. Some areas have restrictions against connecting directly to public drinking
water supply to prevent the feedback of chemicals into the drinking water supply.
Direct connection through a receiver tank or backflow preventer is usually permitted.
The water supply must come from a water main. NEVER use hot water or water from
pools, lakes, etc.
Before connecting the garden hose to the pressure washer:
◾
Run water through the hose for 30 seconds to clean any debris from the hose.
◾
Inspect the metal mesh in the water inlet port. If the metal mesh is damaged, do
not use the machine until the metal mesh has been replaced. If the metal mesh is
dirty, clean it.
◾
Completely uncoil the garden hose or remove it completely from reel to prevent
kinks.
NOTE: There must be enough length of unrestricted hose between the water inlet port
and the hose faucet or shut off valve (such as a “Y” shut off connector).
With the hose faucet turned completely off, attach the end of the garden hose to the
washer.
Loading ...
Loading ...
Loading ...