Hisense DHGE904 9kg Tumble Dryer

User Manual - Page 47

For DHGE904.

PDF File Manual, 58 pages, Read Online | Download pdf file

DHGE904 photo
Loading ...
Loading ...
Loading ...
TROUBLE-SHOOTING
What to do ...?
Disturbances from the environment (e.g. the power grid) may result in various error reports (see
TROUBLESHOOTING TABLE). In such case:
Switch off the dryer and wait at least one minute.
Switch on the dryer and repeat the drying programme.
Most errors during operation can be resolved by the user (see TROUBLESHOOTING TABLE).
If the error occurs again, call an authorized service unit.
Repairs may only be carried out by an adequately trained person.
Repair or any warranty claim resulting from incorrect connection or use of the dryer shall not be
covered by the warranty. In such cases, the costs of repair shall be charged to the user.
Troubleshooting and error table
What to do?CauseProblem/Error
The machine
will not start.
Check whether the main switch is on.The main switch is not
switched on.
Check the fuse. There is no voltage in the
power outlet. Check if the power cord plug is correctly
inserted into the power outlet.
There is
voltage in the
outlet, but the
drum does not
spin and the
appliance does
not work.
Check if the door is closed properly.Open door.
Empty the condensate tank (see chapter
»CLEANING AND
MAINTENANCE/Emptying the
condensate tank«).
The condensate tank is full.
To cancel the start delay, press on the
position (5) DELAY END (DELAYING THE
END OF THE DRYING PROGRAM) and
hold for 3 seconds.
Perhaps the DELAY END
(DELAYING THE END OF THE
DRYING PROGRAM) function
was set.
Program was not started in
accordance with the
instructions.
Re-read the instructions for use again.
The appliance
stops heating
completely
during a
programme.
Clean the net filter (see chapter
»CLEANING AND
MAINTENANCE/Cleaning the net filter in
the door«).
The net filter may be clogged.
As a result, the temperature in
the dryer rises, which in turn
causes overheating, and
therefore heating is switched
off.
Wait for the appliance to cool down, and
try running it again. If the dryer still fails
to start, call a service technician.
47
Loading ...
Loading ...
Loading ...