Loading ...
Loading ...
Loading ...
INSTALLATION AND CONNECTION
INFORMATION!
Remove all packaging. When removing the packaging, make sure not to damage the dryer with
a sharp object.
Selecting the room
INFORMATION!
The dryer may not be in contact with a wall or adjacent furniture. For optimum dryer operation,
we recommend observing the clearance from the walls as indicated in the figure. In case of failure
to heed the required minimum clearance, the dryer may overheat.
INFORMATION!
Vents on the back wall and the air exhaust opening on the front side of the dryer should never
be obstructed.
The room in which you will install the dryer should be sufficiently ventilated, with a temperature between
15°C and 25°C. Dryer operation at a lower environment temperature may result in condensate
accumulation in the dryer interior. Do not place the dryer into a place where there is danger of freezing.
Frozen water in the condensate tank and pump may damage the dryer.
The dryer emits heat. Therefore, do not place it in a very small room, as the drying process may take
longer due to limited amount of available air.
Lighting in the room should be sufficient to allow reading the information on the display unit on the
control panel.
Dryer placement
If you also have a Hisense dryer of corresponding (same) dimensions, it can be placed on top of the
Hisense washing machine; in this case, vacuum feet must be used and wall fixing bracket. Alternatively,
the dryer can be placed next to the washing machine (figures 1 and 3).
17
Loading ...
Loading ...
Loading ...