Loading ...
Loading ...
Loading ...
Cleaning the heat pump filter
INFORMATION!
During cleaning, some water may be spilled. It is therefore recommended to place an absorbent
cloth on the floor.
1 Open the outer cover.
Hold the levers on the inside
cover and rotate them
upwards. Remove the inside
cover.
2 Use the handle to pull
out the heat pump filter.
3 Push the foam part of the
filter from the housing. Use
a damp cloth to clean the
heat pump filter housing.
4 Wash the foam filter
under running water and dry
it before replacing it in the
filter housing.
INFORMATION!
Insert the heat pump foam filter into the housing and close the outer cover (push it upwards
toward the machine until it latches into place).
INFORMATION!
The heat pump filter has to be correctly inserted into its slot. Otherwise, the heat exchanger
installed inside the dryer may be clogged or damaged.
INFORMATION!
Clean the foam filter at least after every five drying cycles.
43
Loading ...
Loading ...
Loading ...