Loading ...
Loading ...
Loading ...
INTERRUPTIONS AND CHANGING THE
PROGRAMME
Interruptions
Interrupting the programme process
Press the (3) START/PAUSE button to pause/resume a programme.
To stop and cancel the drying programme, press the (3) START/PAUSE button and hold it for 3
seconds. The selected programme will stop, and the dryer will start to cool down. Cooling down time
depends on the selected programme. After this process, the drying programme can be selected again.
Open door
If the dryer door is opened during the drying process, the drying cycle will be interrupted.
When the door is closed and the (3) START/PAUSE button is pressed, the drying will resume from the
point at which it was interrupted.
HOT SURFACE!
The dryer door will heat up during the drying process. Make sure you do not burn yourself
when opening the dryer door.
Full condensate tank
When the condensate tank is full, the drying programme will pause (symbol (10)) will be lit up).
Empty the condensate tank (see chapter »CLEANING AND MAINTENANCE/Emptying the condensate
tank«).
Press the (3) START/PAUSE button to resume the drying programme from the point at which it was
interrupted.
Power supply failure
When power supply is resumed, the signal light on the (3) START/PAUSE button will flash.
To resume the drying process, press the (3) START/PAUSE button.
Changing the program/functions
Switch off the dryer by pressing the button (1) ON/OFF; then, switch it on again by pressing the button
(1) ON/OFF and rotate the (2) programme selector knob to the desired programme, or choose extra
functions.
Select another program/function and press the (3) START/PAUSE button again.
Adding laundry after the start of the program
Open the dryer door and press the (3) START/PAUSE button. Insert the laundry and press the button
(3) START/PAUSE.
HOT SURFACE!
When loading the laundry, make sure you do not burn yourself when you open the dryer
door.
Drying time may be extended.
39
Loading ...
Loading ...
Loading ...