Loading ...
Loading ...
Loading ...
24
English
Incline function does not work
When the incline function does not work it is possible that the
calibration values are not matching between the physical incline-
motor and the stored parameters in the console memory.
You can easily solve this problem by performing the build in
automatic incline calibration procedure.
‼
NOTE
• When the incline calibration is in progress, all button functions
will be disabled.
How to calibrate the incline settings
- Turn the treadmill in on mode.
If the treadmill is in ON mode already, shut the power off for 5
seconds and switch it back ON again.
- Press and hold the INCLINE UP & INCLINE DOWN buttons on the
lower button board section simultaneously for ±5 seconds until you
hear a beep chime.
(Function does not work when pressing the console incline buttons)
- The treadmill incline motor start to push the treadmill up to the
maximum incline possibility.
- When reached the maximum incline it will go down to lowest
incline possibility.
- The calibration is complete when the incline is back to fully
horizontal position again, and the incline motor is no longer
moving, There is no notification to confirm the process is finalized.
- Treadmill is ready for use.
Metric/ Imperial setting
When displayed speed is not matching your expectation the machine
might be set in incorrect setting.
Metric: Min./ Max. speed/:
1.0 Km/h/ 22.0 km/h.
Imperial: Min./ Max. speed/:
0.6 Mls/h/ 13.6 Mls/h.
Switch units by:
In mode “ON”:
- Press and hold “Prog” & “Speed -” button for 3 seconds.
Console shows S-01 mode:
- 0.6 When switched to Imperial mode.
- 1.0 When switched to Metric mode.
- Press and hold MODE button for two seconds to switch setting.
Press “Start/ Pause” button to confirm setting and go back to user
mode again.
https://youtu.be/KOxl5obz-RQ
Transport and storage
⚠
WARNING
• Before cleaning and maintenance, remove the mains plug from
the wall socket.
• Carry and move the equipment with at least two persons.
• Make sure that there are no other persons or objects under the
equipment.
- Move the equipment as shown (fig. F3). Move the equipment
and carefully put the equipment down. Place the equipment on
a protective base to prevent damage to the floor surface. Move
the equipment carefully over uneven surfaces. Do not move the
equipment upstairs using the wheels, but carry the equipment by
the handlebars.
- Store the equipment in the upright position (fig. F1). Store the
equipment in a dry place with as little temperature variation as
possible.
Warranty
Tunturi purchaser‘s warranty
Warranty terms
The consumer is entitled to the applicable legal rights stated in
the national legislation concerning the commerce of consumer
goods. This warranty does not restrict these rights. The Purchaser’s
Warranty is only valid if the item is used in an environment approved
by Tunturi New Fitness BV, and is maintained as instructed for that
particular equipment. The product-specific approved environment
and maintenance instructions are stated in the “user manual” of the
product. The “user manual” can be downloaded from our website.
http://manuals.tunturi.com
Warranty conditions
The warranty conditions commence from the date of purchase.
Warranty conditions may vary per country, so please consult your
local dealer for the warranty conditions.
Warranty coverage
Under no circumstances shall Tunturi New Fitness BV or the Tunturi
Distributor be liable by virtue of this warranty or otherwise for any
special, indirect, secondary or consequential damages of any nature
arising out of any use or inability to use this equipment.
Warranty limitations
This warranty covers manufacturing defects in the fitness equipment
as originally packed by Tunturi New Fitness BV. The warranty shall
apply only under conditions of normal, recommended use of the
product as described in the Owner’s Manual and providing that
Tunturi New Fitness BV’s instructions for installation, maintenance and
use have been complied with. Neither Tunturi New Fitness BV’s nor
the Tunturi Distributors’
obligations apply to defects due to reasons beyond their control. The
warranty applies only to the original purchaser and is valid only in
countries where Tunturi New Fitness BV has an authorised importer.
The warranty does not extend to fitness equipment or components
that have been modified without the consent of Tunturi New Fitness
BV. Defects resulting from normal wear, misuse, abuse, corrosion, or
damage incurred during loading or transportation are not covered.
The warranty does not cover sounds or noises emitted during use
where these do not substantially impede the use of the equipment
and where they are not caused by a fault in the equipment.
The warranty does not cover defects arising from the failure to
carry periodic maintenance as outlined within the Owner’s Manual
for the product. Furthermore, the warranty does not cover defects
arising from usage and storage within an unsuitable environment
as described within the Owner’s Manual which should be indoors,
dry, dust and grit free and within a temperature range of +15°C to
+35°C. The warranty does not cover maintenance activities, such as
cleaning, lubricating, and normal part adjustments, nor installation
procedures that customers can accomplish themselves, such as
changing uncomplicated meters, pedals and other similar parts not
requiring any dismantling/reassembling of the fitness equipment.
Warranty repairs carried out by other than authorised Tunturi
representatives are not covered.
Failure to follow the instructions given in the Owner’s Manual will
invalidate the product’s warranty.
Loading ...
Loading ...
Loading ...