Loading ...
Loading ...
Loading ...
302
Note: The user ID and password are case sensitive.
Parent topic: Solving Network Problems
Related references
Feature Settings - Operation Menu
Solutions When Network Alert E-Mails are Not Received
If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's Network Mail
Notification menu or in the network software.
• Set the Standby Mode setting to Communication On so the network software can monitor the
projector in standby mode. Change the Port setting according to your network environment.
Parent topic: Solving Network Problems
Related references
Feature Settings - Operation Menu
Related tasks
Setting Up Projector Network E-Mail Alerts
Solutions When You Cannot Connect Using Screen Mirroring
If you are unable to connect to the projector using Screen Mirroring, try the following solutions:
• Set the Simple AP setting to On.
• Make sure On is selected as the Screen Mirroring setting in the projector's Network menu. Try
turning the setting off and then on again, if necessary.
• Make sure the Operation Mode and Channel settings are correct for your mobile environment and try
connecting again.
• If you are unable to use two Screen Mirroring sources at the same time, set the Network > Network
Settings > Screen Mirroring > Interrupt Connection setting to Off.
• Make sure the mobile device settings are correct.
• You may not be able to connect immediately after disconnecting from the projector. Wait a while and
try connecting again.
Loading ...
Loading ...
Loading ...