Hikvision DS-K2601T MAIN BOARD User Manual

Loading ...

Edit Linkage

Sengs

Select the congured linkage sengs in the device list and you can edit its

event source parameters, including event source and linkage target.

Delete Linkage

Sengs

Select the congured linkage sengs in the device list and click Delete to

delete it.

Congure Device Linked Acons for Card Swiping

You can set the access control device's linkage acons for the specied card swiping. When you

swipe the specied card, it can trigger the alarm output, host buzzer, and other acons on the

same device.

Perform this task when you need to congure the access control device linkage for the card

swiping acon.

Steps

Note

It should be supported by the device.

Click Event Management → Event Card Linkage .

Select the access control device from the list on the le.

Click Add buon to add a new linkage.

Select the event source as Card Linkage.

Input the card number or select the card from the dropdown list.

Select the card reader where the card swipes to trigger the linked acons.

In the Linkage Target panel, set the property switch to on to enable this acon.

Host Buzzer

The audible warning of access control device will be triggered.

Capture

The real-me capture will be triggered.

Recording

The recording will be triggered.

Note

The device should support recording.

Card Reader Buzzer

The audible warning of card reader will be triggered.

Alarm Output

The alarm output will be triggered for nocaon.

Zone

Access Controller User Manual

Loading ...

Hikvision DS-K2601T MAIN BOARD Access Controller