Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/91633964-710-0389/bg71.png)
When detaching an accessory mounted to an SDI output, ensure that you remove the BNC connection to the camera
before removing power to the SDI device:
1. Shutdown the SDI accessory.
2. Disconnect the BNC cable from the camera.
3. Disconnect the power source from the SDI accessory.
When you need to swap out a battery on an accessory mounted to the camera’s SDI port, you must:
1. Shutdown the SDI accessory.
2. Disconnect the BNC cable from the camera.
3. Replace the battery on the SDI accessory.
4. Connect the BNC cable to the camera.
5. Power on the SDI accessory.
For more information, refer to Preventing Damage to SDI Outputs.
For more information about the SDI standard, refer to the SMPTE (Society of Motion Picture
and Television Engineers) standard SMPTE ST-2082.
COPYRIGHT © 2023 RED.COM, LLC 955-0218, REV A | 106
KOMODO-X
®
OPERATION GUIDE
Loading ...
Loading ...
Loading ...