Hikvision DS-K5671-ZH User Manual

Loading ...

Enable the funcon and set the encrypon sector. By default,

Sector 13 is encrypted. It is recommended to encrypt sector

13.

Enable EM Card

Enable EM card and authencang by presenng EM card is

available.

Enable DESFire Card

The device can read the data from DESFire card when enabling

the DESFire card funcon.

Enable FeliCa Card

The device can read the data from FeliCa card when enabling

the FeliCa card funcon.

Set Card No. Authencaon Parameters

Set the card reading content when authencate via card on the

device.

Go to Conguraon → Card Sengs → Card No. Authencaon

Sengs .

Select a card authencaon mode and click Save.

Full Card No.

All card No. will be read.

Wiegand 26 (3 bytes)

The device will read card via Wiegand 26 protocol (read 3

bytes).

Wiegand 34 (4 bytes)

The device will read card via Wiegand 34 protocol (read 4

bytes).

9.6.14 Time and Aendance Status Sengs

Set me and aendance status, for example, manual, auto,

manual and auto.

Set Manual Aendance via Web

Set the aendance mode as manual, and you should select a

status manually when you take aendance.

Before You Start

Add at least one user, and set the user's authencaon mode. For

details, see User Management.

Steps

1. Click Conguraon → Aendance to enter the sengs page.

2. Set the Aendance Mode as Manual.

3. Enable the Aendance Status Required and set the aendace

status lasts duraon.

4. Enable a group of aendance status.

Note

The Aendance Property will not be changed.

5. Oponal: Select an status and change its name if required.

Result

You should select an aendance status manually aer

authencaon.

Loading ...

Hikvision DS-K5671-ZH Face Recognition Module For Turnstile

User Manual - Page 84