Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/59456687-ds-k5671-zh/bg50.png)
Set the door unlocking duraon. If the door is not opened for
the set me, the door will be locked.
Door Open Timeout Alarm
An alarm will be triggered if the door has not been closed
within the congured me duraon.
Door Magnec Sensor Type
You can set the door contact as Remain Open or Remain
Closed according to your actual needs. By default, it is Remain
Closed.
Exit Buon Type
You can set the exit buon as Remain Open or Remain Closed
according to your actual needs. By default, it is Remain Open.
Door Lock Powering O Status
You can set the door lock status when the door lock is
powering o. By default, it is Remain Closed.
Extended Open Duraon
The door contact can be enabled with appropriate delay aer
person with extended access needs swipes her/his card.
Door Remain Open Duraon with First Person
Set the door open duraon when rst person is in. Aer the
rst person is authorized, it allows mulple persons access the
door or other authencaon acons.
Duress Code
The door can open by inpung the duress code when there is
duress. At the same me, the client can report the duress
event.
Super Password
The specic person can open the door by inpung the super
password.
Note
The duress code and the super code should be dierent.
Set RS-485 Parameters
You can set the RS-485 parameters including the peripheral,
address, baud rate, etc.
Click Conguraon → Access Control → RS-485 Sengs .
Check Enable RS-485, and set the parameters.
Click Save to save the sengs aer the conguraon.
No.
Set the RS-485 No.
Peripheral Type
Select a peripheral from the drop-down list according the
actual situaon. You can select from Card Reader, Extension
Module, Access Controller, or Disable.
Note
Aer the peripheral is changed and saved, the device will
reboot automacally.
RS-485 Address
66
Loading ...
Loading ...
Loading ...