Loading ...
Loading ...
Loading ...
Thermal Imagers
Maintenance
31
Battery Care
To get the best performance from the Imager’s rechargeable Lithium-ion smart
batteries, use the guidelines that follow.
Caution
To avoid damage to the Imager, do not leave the camera
exposed to a heat source or high-temperature
environments, such as an unattended vehicle in the sun.
Do not store the Imager on the power supply/charger for more than 24 hours as
reduced battery life may result.
Charge the Imager’s Lithium-ion smart batteries for a 2-hour minimum at least
every six months to maximize battery life. Without use, the batteries will self-
discharge in approximately six months. Batteries stored for long periods may
require two to ten charging cycles before it reaches full capacity.
Always operate the Imager within the temperature range specified in the
specifications labeled Temperature – Operating.
Caution
Do not incinerate the Imager or battery. Go to Fluke’s
website for recycling information.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...